Early Entry Cutting / Soffcut Sawing
Also known as soffcut, is a technique employed to reduce random cracking of the slab caused by internal stresses as the concrete begins to set, and is one of the best solutions in preventing random cracks.
It involves cutting construction joints within two hours (Green Zone) of the slab finishing and works as a preventative measure to protect the concrete from unplanned cracks to achieve a straight-cut finish.
The whole process is relatively clean and hassle-free, as it does not require access to on-site water. This means no slurry cleanup or stains left behind, allowing you to prepare your site for the next phase of construction with minimal downtime.
Attempting to make expansion joint cuts outside of the green zone using water-cooled floorsaws can lead to slurry stains and collection costs, chipping and spalling.
Our highly trained operators use state-of-the-art equipment to make efficient cuts in the Green Zone to effectively minimise the risk of random cracking, so you receive a pristine finish.
We offer from 30mm to 100mm early entry concrete cutting.
Enquire about early entry cuttingFloor & Road Sawing
Diamond Cut Concrete has worked on many projects in Perth, with over 25 years of experience in floor sawing and road sawing. Our extensive experience and knowledge allows us to identify the correct techniques and equipment needed for a fast, efficient and cost-effective concrete sawing solution.
Floor sawing, often referred to as Road Sawing, is essential when cutting horizontal concrete surfaces such as runways, bridge surfaces, car parks, and roads. It is the quickest and most effective method to cut construction joints, as well as communication and plumbing trenches in freshly poured or existing concrete slab.
Floor sawing may also be needed when demolishing and removing suspended concrete slabs, and making long cuts in asphalt roads.
We offer a wide range of floor sawing services suited for all applications and projects, including petrol, diesel and 3-phase electrical machines capable of cutting up to 500mm in depth.
Our operators are on hand and ready-to-go. We are available for all your concrete cutting needs and ensure the exact specifications, shape and dimensions are met on all your projects.
Enquire about floor and road sawingConcrete Hand Sawing
Concrete hand sawing is an ideal method for cutting through concrete slabs, brickwork, block, concrete pipes and concrete walls, to a depth of 270mm. For example, if you’re repurposing a commercial fit-out, the chances are you’re going to need a concrete hand saw.
At Diamond Cut Concrete, we are capable of providing a wide range of hand sawing services to meet your exact specifications on any project. Specialising in concrete cutting, we employ portable and highly versatile electric, petrol and hydraulic hand saws capable of cutting up to 270mm deep.
Our experienced technicians help you achieve absolute-precision with every cut.
Enquire about concrete hand sawingRing sawing
At Diamond Cut Concrete, we use the latest in diamond blade technology which allows us to cut through brickwork, concrete and road surfaces with absolute precision.
Ring sawing is a hand held machine, commonly employed when the concrete is too deep for standard handsaws. It is a used cut through reinforced concrete and brickwork with a maximum depth of 280mm.
With access to a wide range of electric, petrol and hydraulic powered ring saws, our highly trained operators are able to provide the versatility, accessibility and speed necessary to complete projects on time.
Enquire about ring sawingWire sawing
Diamond wire sawing is an effective concrete cutting method that is ideal for removing large heavily reinforced, thick sections of concrete. This can include bridge sections, car parks and other situations where other cutting methods are impractical.
The wire saw uses a continuous steel cable with diamond impregnated beads spaced 10mm to 30mm apart which runs through a system of pulleys at high speeds. It is especially effective at cutting large concrete masses fast and effectively, avoiding overcutting.
To improve accuracy, holes are drilled to place the wire saw precisely where it needs to start the cut. Huge masses of concrete containing reinforced steel and stone can be removed with a wire saw so long as you can circumnavigate the piece to be cut.
Wire sawing is a cost-effective alternative to traditional demolition methods and is relatively clean, fumeless and quiet, with little to no vibrations, making it suitable for all work environments.
Enquire about wire sawingWall Sawing
Diamond Cut Concrete wall sawing services is one of the most effective methods for making precise cuts to deep concrete structures.
Our track-mounted saws are equipped with specialised diamond cutting technology, which allows us to cut concrete up to 540mm in depth. The track can be mounted onto vertical walls, plinths and floors.
Our machinery is electric and hydraulically operated and is one of the safest methods of wall sawing, suitable for locations where hand held equipment would not be practical.
When it comes to precision, we are Perth’s most trusted concrete cutter. We use only the highest standards of quality tools and machinery to achieve pinpoint accuracy with every cut.
With over 25 years industry experience, our expertise ensures you receive the most cost-effective solution that’s suited to your projects budget and timeline.
Enquire about wall sawing